Precautions For Using Non-Contact Infrared Thermometer


During the process of use, some friends will say that the measurement results have deviations. In fact, the Non-Contact Infrared Thermometer is affected by external factors. It is recommended that you perform measurements at ordinary room temperature. If it is in an air-conditioned room, the temperature of the environment itself is 36 degrees, then the human body stays in the air-conditioned room for a long time, and the measurement surface will be greatly affected. At the same time, care should be taken to avoid the Non-Contact Infrared Thermometer being measured in an environment where the temperature is higher than the daily temperature or lower than the daily temperature.

Secondly, the Non-Contact Infrared Thermometer will have a deviation value of 0.3 in the process of use. The deviation value of 0.3 is mostly acceptable to consumers.

Compared with traditional thermometers, the current babies cannot be measured with traditional thermometers. They will feel fear when they see these glass thermometers. If you want them to measure their body temperature for at least ten minutes, plus the total It is moving around, the measured temperature deviation will be more inaccurate. It is recommended that friends use the Non-Contact Infrared Thermometer to measure the distance measured within 3 to 5 cm as far as possible, too close or too far distance will affect the value of Non-Contact Infrared Thermometer's measurement results. After measuring this, there will be some reference values. Consumers can consider the values based on the reference values, or they can take measurements at intervals, measure a few more times, and then judge the change in body temperature.